Aver SF2012H-C user manual Manuale Utente Pagina 1

AVer SF2012H-C User Manual

6 Hardware Installation and I/O Pin Assignment 1. Connect power adapter. 2. Connect IP Camera to PC or network with Ethernet cable. 3. Set up the

7 IP Assignment There are two ways to find IP Camera: − Finding IP Camera by using “NXU Lite recording software” − Finding IP Camera by using “IP i

8 3. Click “Setup” button. 4. Click “Add IPCam” button. 5. Select “IP Camera” item.

9 6. Key in IP Camera’s ID and Password (default is admin/admin) and click “Auto Search” to find camera. 7. In Search Result window, click it the

10 Finding IP Camera by using “IP installer” Use the software, “IP Installer” to assign the IP address of the IP camera. The software is in the attac

11 IP Installer configuration: 1. IP Installer will search all IP cameras connected on the LAN. The user can click “Search Device” to search again.

12 Using NON-DHCP Server/Router Network In Non-DHCP server/router network, the static IP address must be assigned to the device each time when addin

13 IP camera IP addresses: 3. A quick way to access remote monitoring is to left-click the mouse twice on a selected IP camera in “Device lists” in

14 4. Then, please key in the default “User name” and “Password”, both of which are “admin”.

15 Install ActiveX Control The first time you attempt to view the camera video via Internet Explorer, it will ask you to install the ActiveX componen

Table of Contents PREFACE ...

16 5 When the following dialogue box appears, click “Yes”.

17 Using the IP Camera Browser Interface The admin have the full access to the IP Camera browser interface. The menu on the left, you can expand and

18 Name Function (2) Login IP Show PC’s IP address (3) Bandwidth Show current IP camera’s transmitting bandwidth (4) FW Version Show IP camera’s

19 System > General In this section, only admin level is authorized to configure the IP camera system maintenance and the date and time settings.

20 Name Function (4) Firmware Upgrade Upgrade the firmware to the latest version. To Upgrade the IP Camera Firmware 1. Download the file from our w

21 System > General > Date & Time In the “Date & Time” tab, the administrator can set and update the system’s date and time. After fil

22 Name Function (4) Setting Method Select the date & time settings method. Sync with current PC – Obtain the date and time setting on the curr

23 password in “Confirm”. Then, click “Add/Set”.  User List: Click edit to change the account password. To delete the user account, click Remove

24 System > Network Setting>Sever Used to send out the video via Email or FTP, or to save on NAS.  Mail Setting: Used to send out the video v

25  NAS Settings: Used to send out the video to NAS server. a. Enter necessary information in “Location”, “Workgroup”, “Account Name” and “Password

SYSTEM > NETWORK SETTING>DDNS ... 25 SYSTEM > NETWORK SETTING &

26  Status - Common warning message: Updating! Failed(1), Please check your DNS setting. Failed(2), Please check your internet connection. Failed(

27 System > Network Setting >Other 1 User may need to assign different port to avoid conflict when setting up IP assignment. Click Apply to sa

28  Security: Yes is required account and password to connect with this IP camera through ONVIF protocol. No is not required account and password to

29 System > Network Setting >Other 2 Multicast Setting (based on the RTSP Server): User can setup two streaming based on the RTSP Server. Mult

30 Step 2: Step 3: Select Media/open network stream 3. Select force multicast RTP via TRSP 2. Select Demuxers and RTP/RTSP 1. Select all

31 Step 4: Input rtsp://[IPCAM Address] / [RTSP Path] The URL address should be the same as the RTSP path in Video Stream (System-->Video Stream)

32 [Notice] a. If the received image is not from the required IP camera, please adjust the value. (Change either IP Address or Port number) b. If

33 System > Image Admin and operator levels can adjust the Image setting. There are 5 tabs: OSD, Preference, Exposure, Advanced, and Privacy Mas

34 System > Image>Preference In Preference tab, you can tune the IP camera white balance, display color or black & white, set the flicker

35 System > Image>Advanced Click Default button will back to factory default setting.  Night Mode: select the setting of night mode.

COPYRIGHT ... 55 NOTICE ...

36 System > Image>Privacy Mask For the security purpose, there are three areas can be setup for privacy mask. Click Area #(Area 1, Area 2, Area

37 System > Video Stream>General  Input Resolution: Select the video resolution that is the maximum resolution supported in Stream 1 and Strea

38 System > Video Stream>Stream1  Basic Mode Click Apply to save the configuration. − Resolution: There are 8 resolutions can be chosen -- 160

39 − Video Format: H.264 or JPEG − RTSP Path: It’s a URL address

40 System > Video Stream>Stream2  Basic Mode Click Apply to save the configuration. − Resolution: There are 8 resolutions can select -- 1600x

41  Advanced Mode Click Apply to save the configuration. − Resolution: There are 8 resolutions can select -- 1600x 1200, 1280x1024, 1280x960, 1280x

42 System > Video Stream>Stream3 [Note] 3GPP mode suggested setting: 176x144 resolution, 5FPS, MPEG4 format.  Stream 3 Setting: Enable or Dis

43 System > Audio IP camera supports 2-way audio (mono). User can send audio from IP camera built-in MIC (depending on different models) to remote

44 System > SD Card Please insert micro SD/SDHC card before using it. Make sure pushing micro SD/SDHC card into the slot completely. [Note]The us

45 Event > Arrangement>Motion Motion Detection: IP camera allows 3 areas motion detection. When motion is triggered, it can send the video to s

1 Preface The SF2012H-C is a compact cube camera for indoor use with two-way audio communication. It has the added security of a Micro SD based local

46 Event > Arrangement > Preference  Record File:  File Format: IP camera allows 3 different types of recording file to change its record s

47 Event > Schedule  Schedule: After complete the schedule setup, the camera data will be recorded according to the schedule setup.  Snapshot: A

48 Event > DI/DO IP camera supports 1 input/1 output (depending on different models). When input is triggered, it can send the video to some speci

49 Status Information Click Apply button to save the configuration.  Networking Info: Displays network information of the IP camera.  Product Info

50 Network Configuration  Configuration 1 a. Internet Access: ADSL or Cable Modem b. IP address: More than one real IP c. IP camera and PC con

51  Configuration 2 a. Internet Access：ADSL or Cable Modem b. IP address：one real IP c. IP camera and PC connect to the internet d. Device nee

52 Factory Default 1. To recover the default IP address and password, please follow the following steps. 2. Remove power, and press and hold the bu

53 Troubleshooting Here are some useful tips on how to solve some common problems. Problem Solution I forgot the account and password for SF2012

54 Appendix SF2012H-C is compliant with Micro SD/SDHC card and to ensure recording quality, and please use memory cards over 2G and Class 4 above (Ma

55 FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

2 Network Ethernet 10/100 Base-T Network Protocol HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP, UPnP, 3GPP,RTSP, RTP, RTCP, Multi-casting

56 Limited Warranty AVer Information, Inc. (“AVer”) warrants that the applicable product (“Product”) substantially conforms to AVer’s documentation f

57 Governing Law and Your Rights This warranty gives you specific legal rights; You may also have other rights granted under state law. These rights

3 Web browsing requirement OS Windows® XP (32-bit), 7 (32/64-bit) Microsoft® IE 6.0 or above (32-bit only) Hardware Suggested Intel® Dual Core 1.

4 Package contents Item Descriptions 1. SF2012H-C 2. Stand box 3. Ethernet cable 4. Power Adaptor(DC 12V/1A) 5. CD (User’s Manual and Qui

5 Product Installation Monitor Setting 1. Right-click on the desktop. Select “ Properties” 2. Change “Color quality” to “Highest (32-bit)”.